Kohler Courage SV735 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Motor Kohler Courage SV735. Kohler Courage SV735 21 páginas. Vertical crankshaft
También para Kohler Courage SV735: Manual del usuario (21 páginas), Manual del usuario (8 páginas)

Imprimir página

Latch

Figure 13. Unhooking Latch (Courage PRO).

Service Precleaner

If so equipped, wash and reoil the precleaner every 25

hours of operation (more o en under extremely dusty

or dirty conditions). Replace the precleaner annually

or every 100 hours.

1. Open the door on the blower housing to access

the air cleaner element and precleaner. See

Figures 10 and 11.

2. Unhook the latch and remove the precleaner from

the air cleaner element, or remove as an assembly

for servicing. Make sure the base and the sealing

area is clean before reassembly is performed. See

Figures 12 and 13.

3. Wash the precleaner in warm water with

detergent. Rinse the precleaner thoroughly until

all traces of detergent are eliminated. Squeeze out

excess water (do not wring). Allow the precleaner

to air dry.

4. Saturate the precleaner with new engine oil.

Squeeze out all excess oil.

5. Reinstall the precleaner over the paper element

and secure with the latch.

6. Close and latch the door.

7. When precleaner replacement is necessary order

genuine Kohler Parts.

32 083 05-S Precleaner

32 083 08-S Precleaner (PRO)

37 mm (1.45 in.) high

71 mm (2.79 in.) high

Service Paper Element

Check the paper element every 50 hours of operation,

(more o en under extremely dusty or dirty

conditions). Clean or replace the element as necessary.

Replace the air cleaner element annually, or every 100

hours.

1. Open the door on the blower housing to access

the air cleaner element. See Figures 9 and 10.

2. Unhook the latch and remove the air cleaner

element and precleaner (if equipped). See Figure

12 and 13.

3. Remove the precleaner (if so equipped) from the

paper element. Service the precleaner as described

in Precleaner Service.

4. Gently tap the paper element to dislodge dirt. Do

not wash the paper element or use pressurized

air, as this will damage the element. Replace a

dirty, bent, or damaged element with a genuine

Kohler part. Handle the new element carefully;

do not use if the sealing surfaces are bent or

damaged.

32 083 03-S Element

32 083 06-S Element (PRO)

5. Clean the air cleaner base as required and check

condition.

6. Reinstall the precleaner (if equipped) over the

paper air cleaner element and install on the base.

Secure with the latch.

7. Close and latch the door.

Clean Air Intake/Cooling Areas

To ensure proper cooling, make sure the grass screen,

cooling ﬁns, and other external surfaces of the engine

are kept clean at all times.

Every 100 hours of operation (more o en under

extremely dusty, dirty conditions), remove the blower

housing and other cooling shrouds. Clean the cooling

ﬁns and external surfaces as necessary. Make sure the

cooling shrouds are reinstalled.

44 mm (1.73 in.) high

78 mm (3.07 in.) high