A-S-S BASS 2020 Instrucciones de trabajo - Página 3

Navegue en línea o descargue pdf Instrucciones de trabajo para Máquina de coser A-S-S BASS 2020. A-S-S BASS 2020 7 páginas. Automatic single head serging unit for sewing of front- and back trouses without knee lining

Imprimir página

e.g. GP: 01 = 0.5 sec

ERROR TIME ANF

The functional key F3 is used to select the parameters in the list or basic

settings. Through pressuring on the key the parameter number increases

accordingly .By pressing function key F4 the parameter number decreases

once more.

Pressuring on the function key F2 the Curser flashes on the first position that

can be changed, after renewed pressing of the key F2, the Cursor moves a

step to the right. Now the numerical values can be increased or reduced with

the help of the keys F3 and F4.

If you press the key P/ once more, the program is shown again.

3 After pressing the key F2

The special parameters appear in the display which when changed will a have

an effect on the joint program selected currently. This is applies only to the

stitch number 4 (inseam) and the join number 5 (outseam) in the preseam's

1,2,3 only the sewing speed can be altered.

SP Parameter

01 = SLOW SEW. SPEED

02 = FAST SEW. SPEED

03 = SLOW SEW. DURATIO

04 = CONT. GUIDE DOWN

05 = UNLOADER MOVES

06 = TILL TABLE BLOW

07 = TABLE BLOW DURAT

08 = TILL UNLOADER

09 = Free

10 = START MODUS

11 = TILL CONT. ROLLER

12 = CONT. ROLLER DOWN

13 = CONT. ROLLER UP

14 = CHAIN STOP DURAT

15 = STACKER MODUS

16 = Free

e. g. VP: 03 = 5000 RPM

1. SEWINGSPEED

(xx00Rpm)

(01cm)

(0.01 sec)

(01cm)

(01)

(01cm)