Kohler 30RES Manual - Página 14

Navegue en línea o descargue pdf Manual para Generador portátil Kohler 30RES. Kohler 30RES 36 páginas. Residential generator sets

Imprimir página

2.3 Exercising Generator Set

Operate the generator set under load once each week

for 20 minutes.

The operator should perform all of the prestart checks

before starting the exercise procedure.

generator set according to the starting procedure in the

controller section of this manual. While the generator

set is operating, listen for a smooth-running engine and

visually inspect the generator set for fluid or exhaust

leaks.

2.4 Advanced Digital Control

Operation

Figure 2-1 illustrates the user interface on the Advanced

Digital Control (ADC 2100).

Note: Have setup and adjustments of the ADC 2100

performed only by an authorized distributor/

dealer. The setup and adjustments are password

protected.

2.4.1

Controls and Indicators

Figure 2-2 describes the controls and indicators located

on the controller. The LED display indicates generator set

status as shown in Figure 2-2. The display is active when

the master switch is in the RUN or AUTO position and

remains active until the generator set master switch is

moved to the OFF/RESET position or the power to the

controller is removed.

configuration, the LED display may turn off after a period of

inactivity when the master switch is in AUTO. See Section

2.4.6.

Control or Indicator

Item

LED display

Runtime hours

Crank indication Displays CC_1, CC_2, or CC_3 to indicate the first, second or third attempt to

Fault codes

Software

version

Keypad

Select and

arrow buttons

Generator set master

Three-position

switch (RUN-OFF/

switch

RESET-AUTO)

Figure 2-2 ADC 2100 Controls and Indicators

Section 2 Operation

Start the

Depending on the controller

Description

Displays total generator set runtime hours.

start the engine. The last digit flashes during the crank cycle rest periods.

Flashes a 2- or 3-letter fault code to indicate various fault conditions. See

Section 2.4.4.

See the generator set installation manual.

The keypad is used for controller setup and adjustment only. Have setup and

adjustments performed only by an authorized Kohler distributor/dealer. The

setup and adjustment functions are password-protected.

Switch functions as the generator set operation and controller reset switch.

The buttons on the controller keypad are used only for

system configuration and adjustment. The ADC 2100 is

factory-set and should not require configuration or

adjustment under normal operating conditions. If the

generator set is reconnected to a different voltage and/

or frequency, refer to an authorized Kohler distributor/

dealer for system configuration and adjustment

instructions.

1. LED display

2. Up and down arrow buttons

(use for setup and adjustment only)

3. Generator set master switch

4. Select button (use for setup and adjustment only)

Figure 2-1 ADC 2100 Controls

GM28707A-C

TP-6344 4/09