Kohler 2473 Manual de instalación y uso - Página 4
Navegue en línea o descargue pdf Manual de instalación y uso para Mobiliario interior Kohler 2473. Kohler 2473 24 páginas. Vanity cabinets and mirrors
Imprimir página
Install the Mirrors
Finished Wall
1.
Decide on the location of the mirror and hold the mirror flush against
the wall.
2.
Mark the centre width of the mirror on the top edge of the mirror frame
with a pencil. Set the mirror aside.
3.
Measure and mark 108 mm down from the centre width mark. This
mark is the centre for the hanger.
4.
Hold the centre of the hanger at the marked point for the hanger. Make
sure that the largest side of the hanger is facing against the wall, as
illustrated.
5.
Make sure that the hanger is level, then using a suitable drill, drill the
holes for the fixing screws (not supplied). Fit suitable wall plugs.
6.
Fit the hanger to the wall with the screws.
7.
Carefully hang the mirror on the wall so the pre-installed mirror
hanger is centred on the mounted hanger.
hangers interlock correctly.
INSTALLATION
108 mm
Large side
of hanger
faces wall
Hanger
Finished Wall
4
Pre-Installed
Hanger
Hanger
Mirror
1067217-070
Make sure that the
1067217-W2-B