Auto Sleep Settings
Auto Sleep Settings can also be configured in the Acaia App.
1. The number indicates the amount of time before the scale enters sleeping mode. For example,
when 10 is selected, the scale enters sleeping mode after 10 minutes of idling.
Auto Zero Settings
1. When Auto Zero setting is off or disabled, the initial weight on weighing pan must be less than
50% of capacity, i.e., less than 1kg for Acaia coffee scale before the scale is turned on;
otherwise, an error [ Er.303 ] occurs. When the error occurs, the scale would not work until the
initial weight on weighing pan is cleared.
2. When Auto Zero setting is on or enabled, the scale displays the initial weight directly regardless
whether the weight is over 50% of capacity.
Zero Tracking
Zero Tracking is a function for maintaining the zero indication within certain limits automatically.
1. OFF: It is not recommended to turn off the Zero Tracking because the zero indication would draft
easily as room temperature changes.
2. 0.5d~3d: For example, since each division is 0.1g, 3d = 0.3g. When Zero Tracking is set to be
3d, any initial weight between +/- 0.3g on the weighing pan would be zeroed out.
3. 2d is recommended in general for Acaia coffee scale.
Key Sound Settings
Key Sound Settings can also be configured in the Acaia App.
Set the Key Sound function off to turn off the beeping sound or on to turn on the beeping sound.
Zero Range Setting
Zero Range setting determines the range for which
tare operation.
1. When Zero Range is set to 2, the range for zero-setting will be 2% of the capacity, i.e., +/- 40g
for Acaia coffee scale. By pressing
operation while any weight lays outside the range is tared out by tare operation.
2. If Zero Range is set to 100, the range for zero-setting will be 100% of the capacity, i.e., +/- 2kg
for Acaia coffee scale. Therefore, instead of tare operation, zero operation would be executed in
this setting whenever
Chapter 5: Configuration
T
button, any weight within +/- 40g is zeroed out by zero
T
button is pressed.
T
button executes zero operation instead of
17
Imprimir página