a-TroniX 9885110 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial a-TroniX 9885110. a-TroniX 9885110 5 páginas. Relay card

User Manual

a-TroniX Relay card 1–3 kVA

4. Installation

It applies to high frequency on-line UPS with SNMP SLOT (INTELLIGENT SLOT).

All inputs/outputs are isolated or potential-free.

The relay card can easily be plugged into the adapter slot (INTELLIGENT SLOT) of the

UPS and must then be coupled to the higher-level control via a signal cable.

The card is also configurable, so that essentially the assignment and the switching

behaviour can be defined.

1. Open the cover plate of INTELLIGENT SLOT on the rear panel of UPS.

2. Insert the card directly along the gap of the

INTELLIGENT SLOT until the metal plate of the

connection interface is tight against the surface

of the UPS back panel. This indicates that the

card is inserted correctly. Then use the screw

lock and fix the relay card in place.

3. Connect the UPS to the monitor via the connection cable. The monitoring device

displays and controls the operating status of the UPS to allow remote monitoring of the

UPS operation.

5. Recycling & ENVIRONMENT

Do not discard waste electrical or electronic equipment (WEEE) in the trash.

■

Refer to your local codes for disposal requirements.

For more information, contact us on the hotline +49 4101/376760,

■

Indicates recycling information.

■

The packaging is recyclable.

Refer to your local codes for disposal requirements.

Page 4

or use the QR code.

09/2021