Aqua APP-C Series Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Bomba de agua Aqua APP-C Series. Aqua APP-C Series 9 páginas. Air pressure pump

USAGE

Take off the lid, pour the liquid into the can and make sure cans outlet is in the

same position as lid's outlet. Insert the suction pipe. Regulate its length if

necessary.

Cover the tank with a lid. Fix the lid using bolts. Tighten them equally.

Set the delivery valve perpendicularly to the hose in order to close it.

Set the air valve ② perpendicularly to the hose in order to close it.

Close the air release valve ④.

Connect compressed air line to the coupler.

Opening the air valve ② will let compressed air (1 MPa) into the can. Check if the

pressure meter shows value below 0.3 MPa.

※ If the pressure exceeds 0.5 MPa, the safety valve will open. If it does, immediately

stop the delivery. After the pressure comes back to normal set the pressure regulator

properly to a level of 0.3 MPa or below.

Opening the delivery valve ⑤ begins the delivery.

Closing the delivery valve ⑤ stops the delivery respectively.

10. After using the device, close the air valve ② to cut off the air supply.

11. Opening the air release valve ④ will restore normal pressure inside of the tank.

12. When the pressure meter shows 0, remove the lid.

Leftover pressure may cause the lid to jump off. It may also splash the

leftover liquid.

Remember to check the pressure meter first.