Dexin DL-2090C Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Ratón Dexin DL-2090C. Dexin DL-2090C 14 páginas. Wireless 7-buttons rechargeable mouse

Restart the computer again. If the LED inside the receiver does not light

up when moving the mouse, please re-connect the mouse to the receiver.

Q: The mouse cursor can only move left & right during operation (it could

be caused by low battery or the optical sensor's data error).

A: Please take out one of batteries and put it back for a power reset and

then redo the connect procedure.

Q: The mouse does not work after waking up from power off mode by

pressing the connect button once.

A: This might be caused by imprecisely depressing the connect button to

wake up the mouse. Users can gain back normal operation by pressing

connect button on the mouse first, and then pressing the one on the

receiver. As soon as the LED inside the receiver starts flashing, the

mouse is ready to operate.

Optical Sensor Mouse functions best on surfaces with details for tracking. It may

not function on reflective, reflective pattern or non-visible detail surfaces!

2. Reducing Interference with Other Wireless Devices

Reducing Interference with Other Wireless Devices: All 27MHz

radio-based devices are subject to interference from other 27MHz

radio-based devices, such as cordless telephones, cordless baby monitors,

and cordless toys. It may help to move the receiver unit and the base unit

of other wireless devices (such as cordless telephone cradle) as far apart

as possible. You may need to try several times for a location that is best in

your operating environment.

Move the receiver and the mouse closer to each other so that the

receiver is relatively shorter in distance to the mouse than to other

27MHz transmitters. You may need to re-establish the "connection".

Note: Avoid using this device on a metal surface because a large surface of iron,

aluminum, copper, or other metal may act like a shielding to the RF antenna of

the mouse and the receiver.

3. Interference with other RF wireless mouse

If the interference comes from other same model of RF wireless mice, please

"Setting up connection between mouse and receiver" of the installation guide

to switch to a new RF channel. A new identification code is also generated