Dexin KW2033 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Accesorios informáticos Dexin KW2033. Dexin KW2033 8 páginas. Wireless radio frequency multimedia keyboard & mouse

Imprimir página

The Multimedia Buttons on the keyboard are labeled as follows:

Vol +

Increase volume.

Vol -

Decrease the volume.

Play/Pause Press this button once too play CD/VCD, press again to

pause playing

Mute

Press this button once to mute the volume, press again

to un-mute.

Home

Press this button to launch the default Internet brows er

application.

E-mail

Press this button to launch the default E-mail

application.

Favorites

Press this button to bring up " My Favorites Window",

Press again to close " My Favorites Window" .

Press this button to bring up "Search window" for web

address, Press again to close "Search window" .

Troubleshooting

1) I cannot put my computer to sleep using the Suspend Hot Key- If you press

the Suspend Hot Key to place your computer into suspend, standby, or

hibernation mode. And nothing happens, then you may not have a computer

with power management functionality.

To fix this problem

Refer to your computer hardware documentation regarding power-management

operation. Ensure that the power-management settings for your operating system

are correct, as described in Windows Help.

2) I cannot wake up my computer by pressing a key- If you pressed the Suspend

Hot Key to place your computer into a suspension, standby, or hibernation mode,

but cannot then awaken your computer by pressing another key, you may have

encountered a problem with the power management functionality. Some systems

will not wake up, once they have been placed into a suspend, standby, or

hibernation mode.

To fix this problem

Do not press the Suspend Hot Key to wake up your computer. The Suspend Hot

Key is designed to only place your computer into a suspend, standby, or

hibernation mode. Refer to your computer hardware documentation regarding

power-management operation. Some computers may require you to press a

particular button on the computer to wake it up. Ensure that the power-

management settings for your operating system are correct, as described in

Windows Help.

3) My keyboard or mouse does not work or does not work properly after

installation.

To Fix This Problem

Make sure you have connected the receiver correctly. For optimal performance,

place the receiver at least 8 inches or 20 centimeters away from other electrical

devices, such as the computer, the computer monitor, or external storages

devices. Make sure you have installed the batteries correctly. Make sure you

have set the same ID on both transmitter (mouse and keyboard) and the receiver

(see Setting the ID under Hardware Installation). If the problem persists, try an

alternative ID selection to avoid possible interference. Remember to set the

same ID or both transmitter and receiver.

4) My keyboard or mouse is not detected

To Fix This Problem:

Make sure you have connected the receiver correctly. Do not plug or unplug the

receiver cables while the computer is running. You may have other system

devices that conflict with the mouse and keyboard. Check the IRQ / address

settings of these devices for conflicts and change the settings as required.

Interference with other radio devices

Please try to keep the keyboard and the receiver away from other radio devices

at least 8 inches (20cm) to avoid any interference.

Interference with other RF wireless keyboard

Please switch the channel to a different ID. To do so, you need to adjust both

receiver and keyboard to the new channel ID. To adjust the channel ID of the

receiver, turn to the bottom of the receiver and select a different channel ID

from other RF wireless keyboards. To adjust the channel ID of the keyboard,

turn the keyboard upside down and remove the battery cover and the batteries.

You will see the ID switcher. Select the channel ID to the exact same ID of the

receiver. If you are using the keyboard within 30 feet of the receiver try to

change the location of the receiver. You can use the magnetic pad on the bottom

of the receiver to stick at up/left/right side of the computer case.

Keyboard or pointing device is not functioning:

If keyboard or/and pointing device is/are not functional, please exit form any

open programs and turn off the computer as you normally would when exiting

Windows.

?? Check that both the keyboard cable and mouse cable is properly and firmly

connected to the proper port. Additionally, check that the channel IDs (DIP

Switches) of both receiver and keyboard are the same.

?? Make sure that the batteries are properly installed and well connected. When

testing use new batteries.

Restart the computer again. If the keyboard or pointing device is still not

functional, please contact technical support