AvLab DP SoundWave 5.1 PCIe Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Tarjeta PCI AvLab DP SoundWave 5.1 PCIe. AvLab DP SoundWave 5.1 PCIe 12 páginas.
Imprimir páginaFront Panel Audio Connector Pin Assignment
1
3
5
7
9
Hardware Installation
Note: For low profile systems, replace the currentlymounted
bracket with the included low profile bracket.
General instructions for installing the card are provided
below. Since the design of computer cases and motherboards
vary, refer to your computer reference manual for further
information if needed.
Static Electricity Discharge may permanently damage your
system. Discharge any static electricity build up in your
body by touching your computer case for a few seconds.
Avoid any contact with internal parts and handle cards
only by their external edges.
1.
Turn OFF the power to your computer.
2.
Unplug the power cord and remove the computer
cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
Carefully align the card to the selected PCIe slot, push
the board down firmly, but gently, until it is well
seated.
5.
Replace the slot bracket holding screw to secure the
card.
2
4
6
8
1 0
Figure 2
Pin
Signal
1
PORT 1L
2
GND
3
PORT 1R
4
PRESENCE#
5
PORT 2R
6
SENSE1_RETURN
7
SENSE_SEND
8
KEY
9
PORT 2L
10
SENSE2_RETURN
3