DEXMA DEXGate2 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Instrumentos de medida DEXMA DEXGate2. DEXMA DEXGate2 8 páginas.

4 .

Set Date and Time

1. Go to System > Time and date and select the timezone according to the location. Then just

click on Save. (DEXGate2 uses the UDP port 123 to synchronize the time*)

2. If Synchronization through UDP port 123 is not available, you can set the date and time

manually by selecting Manual (Not recommended).

(* In case of doubt, ask your system administrator).

5 .

NOTE: The DEXGate2 registration process in DEXCell Energy Manager can be done before or after

installing the device.

1. Access DEXCell Energy Manager with your username and go to Settings > Gateways

2. Click on "Register a new gateway" and select DEXGate2

3. Enter a name and the serial number or "identifier" of DEXGate2 (lowercase letters) that

you will find on the menu "Status" at your DEXGate2 or at the sticker on the device. Select a

time-zone and click on Save.

4. Enter at "Edit" and write down the "Gateway token" generated by DEXCell Energy Manager

at this screen. This code must be entered in the DEXGate2 at the end of the registration pro-

cess.

5. Through the web interface configuration access DEXGate2 Modbus> Settings. At Modbus

configuration you will find the following lines where you have to add the "Gateway token" you

wrote down at the previous step:

# token of this dexgate in dexcell

token=xxxxxxxxxxxxxxxxxxxxxxxxxx

6. Click "Save and reboot"