Aqua Control AQUATIC 1HP FUSION Series Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Fuente al aire libre Aqua Control AQUATIC 1HP FUSION Series. Aqua Control AQUATIC 1HP FUSION Series 14 páginas.
Imprimir página
A1
Parts Needed:
Nozzle base
x 1
Center Bolt
x1
1. Assemble Nozzle Groups:
.5 Nozzle Tip
10° Elbow
3. Install Nozzle Groups to Base
1
2
8
7
9
3
6
12
10
11
4
5
4. Attach Nozzle to the Unit
Next place the Nozzle Base
on the ouflow and secure
with the center bolt
For a Twister:
Follow the instructions on the
"Installing Twister Module" page
Fusion Series:
CLUSTER ARCH
.6 Nozzle Tip
.5 Nozzle Tip
x 1
x12
Screw
x62
2x Screw
12 Total
(Group 1)
10° Elbow
x12
Rubber
Plug x1
2. Install Flare:
Install 12x Group 1 Nozzles on holes 1-12
3
Use these holes so that
nozzles point out
away from the center
For a Twister setup install Group 1 using
the rotated(45°) holes shown here
Finally attach the plugged .6 Nozzle Tip
to the center of the Nozzle Base using 2 screws
Plug through bottom
Flare Attachment
x1
Make sure that the Flare
is installed in the down
position(It should be
shipped this way already)