AAXA Technologies M1 Standard Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Proyector AAXA Technologies M1 Standard. AAXA Technologies M1 Standard 18 páginas.
También para AAXA Technologies M1 Standard: Manual del usuario (17 páginas), Manual del usuario (16 páginas), Especificaciones (2 páginas), Especificaciones (2 páginas)
Imprimir página
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
The projector is in the shut-down cooling cycle
NO PICTURE
Possible Causes
The video source is not properly connected
The correct input source has not been selected
IMAGE IS BLURRED
Possible Causes
The Projector is not in focus
The Projector is offset from plane / angle of
operation
SD CARD IS NOT RECOGNIZED
Possible Causes
SD Card is not inserted properly
SD Card is damaged
REMOTE CONTROL DOES NOT WORK
Possible Causes
The remote control battery is dead
Check to ensure the power outlet or battery source is good. Check
the power adapter to ensure a proper connection with the wall
outlet as well as the projector.
Wait until the projector has fully cooled to restart
Solution
Check the video source signal to ensure that it is properly
connected
Select the correct input source by pressing the Source key on the
remote.
Adjust the focus with the focus adjustment dial until the image
comes into focus
Move the projector so that it is at both 180 degrees and on an
even plane with the screen. Please see Page 9
Re-insert SD Card
Replace SD Card
Replace the battery with comparable CR2025 battery
Solution
Solution
Solution
Solution
15