A.E.B. 1070 Manual de instrucciones de montaje - Página 5
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Accesorios A.E.B. 1070. A.E.B. 1070 16 páginas. Resistive sensor brc standard for mv dx
Imprimir páginaAssembly instructions and guarantee
Resistive sensor BRC standard for MV DX
1) Place the sensor on the multivalve and fix it with the relevant screws.
2) Insert the connector into the sensor and wire as indicated in the assembly
diagram of the switch / indicator.
3) Program the microswitches on the base of the GAS control unit used.
It is possible to carry out a small change of the kilometre number
that can be driven as reserve; by rotating the sensor in the seat of
the multivalve in counterclockwise direction, the kilometres that
you must drive as reserve are reduced, while rotating it in
clockwise direction, they increase.
Control unit model
BRISTOL - STORM
ELITE - WINDY
ECOGAS - LAMBDA GAS
FLYING - INJECTION
N.B.: to obtain a correct indication we suggest you to set the references
of the maximum and minimum tank level as follows:
Maximum 2750
A.E.B. srl Via dell'Industria 20
42025 CAVRIAGO (RE) ITALY
Tel. 0522 - 941487 Fax 0522 - 941464
Technical Service Tel. 0522 - 942281
Code 1070
Microswitch setting
SW 1
ON
ON
OFF
ON
Minimum 950
English
SW 2
ON
OFF
OFF
ON
IS1070 Rev. 220102 - 0