Aqua Creek F-700RL Manual - Página 10

Navegue en línea o descargue pdf Manual para Ayuda a la movilidad Aqua Creek F-700RL. Aqua Creek F-700RL 14 páginas.

PROCEDURE

Wash down lift with fresh water and dry with clean, soft,

non-abrasive cloth.

Recharge battery.

Run the lift through a complete test cycle to verify it is

functioning properly.

Visually inspect lift for damage, corrosion, and loose or

missing hardware.

Check all contact points for damage and/or corrosion.

Repair, clean, and apply dielectric grease to all contact

points.

Thoroughly clean lift frame and apply a liberal coat of car

wax to maintain the lift's finish.

Check all Warning and Cautionary labels to make sure they

are not faded or worn. Replace as needed.

PROPER CARE NOTES

• Use only fresh water to wash your lift. Do not wash with pool water.

• Use only clean, soft, non-abrasive cloths to wipe down your lift.

• Do not store lift in pump room or near chemicals.

• Do not allow children to play on or around this lift.

• When cleaning the lift, do not spray water directly on control box or battery.

• The lift may need to be bonded according to local code requirements.

STAIN REMOVAL TIPS:

To remove stubborn stains from finish, spray affected area with Mild Dish Soap, rub

briskly with a 3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply

wax to protect when dry.

For service and/or replacement parts contact Aqua Creek direct at

Proper Care of Pool & Spa Lifts

Toll free: (888) 687-3552

DAILY

WEEKLY



Revised 8/11/16

MONTHLY

