Aqua Creek TIDAL WAVE F-TWPB-06 Manual - Página 7

Navegue en línea o descargue pdf Manual para Gimnasios Aqua Creek TIDAL WAVE F-TWPB-06. Aqua Creek TIDAL WAVE F-TWPB-06 14 páginas.

The Tidalwave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at
the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3-5 feet
(0.9 to 1.5 meters). See FIG. 9 & FIG. 10 below.
FIGURE 9
The Tidalwave pool bike can be set to multiple levels of resistance. The resistance adjustment knob is
located on the main frame. To increase resistance for a harder workout, turn the knob clockwise. To
decrease resistance, turn the knob counter-clockwise. See FIG. 11 and
FIG. 12 below.
NOTE: Always begin pedaling on the easiest level and increase resistance to more diffi cult settings
while pedaling. Never start pedaling at high resistance as you may experience a transmission bind
up. However, if this does occur, release the resistance back to easy and begin again.
RESISTANCE
ADJUSTMENT
ROD
Copyright © 2019 Aqua Creek Products All Rights Reserved
Tidalwave Operating Instructions
PLACE IN WATER
RESISTANCE
ADJUSTMENT
KNOB
FIGURE 11
FIGURE 10
ROTATE TO
INCREASE
RESISTANCE
*Frame not shown for clarity
ROTATE TO
DECREASE
RESISTANCE
FIGURE 12
7
Revised 10/30/19