Aqua Creek Tidal Wave Manual - Página 5

Navegue en línea o descargue pdf Manual para Equipamiento médico Aqua Creek Tidal Wave. Aqua Creek Tidal Wave 15 páginas.

TOOLS REQUIRED
3/16" ALLEN WRENCH
5.
Attach the pedal assemblies to
the main frame, using the supplied
allen wrench, with two (2) 5/16" x 3/4"
button head bolts (shortest bolts in the
hardware bag), 5/16" lock washers and
5/16" l at washers.
See FIG. 5 to the right.
NOTE: Be sure the pedals are opposite
each other! If the left pedal is all the
way up, the right pedal should be all
the way down!
6.
Attach the seat to the main frame
using the quick adjustment knob. The
seat has 5 height adjustment holes, in
1" increments.
See FIG. 6 to the right.
NOTE: It is easiest to set seat height,
handlebar location and foot strap
tightness BEFORE placing the bike in
the water. Before riding, always check
that the seat post is securely clamped.
Riding with an improperly tightened
seat post can allow the saddle to slip
and/or fall.
Copyright © 2016 Aqua Creek Products All Rights Reserved
Tidalwave Assembly Instructions
MAIN FRAME
PEDAL
ASSEMBLY (2)
FIGURE 5
MAIN FRAME
5/16" X 3/4"
BHSCS (2)
5/16" LOCK
WASHER (2)
5/16" FLAT
WASHER (2)
ADJUSTABLE
SEAT
QUICK ADJUSTMENT
KNOB
FIGURE 6
5
Revised 5/10/16