AVM OVATION CD 6.3 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD AVM OVATION CD 6.3. AVM OVATION CD 6.3 19 páginas.

1.6 Connection of digital signal sources

Digital signal sources

Connect the outputs of your digital sources to the corresponding inputs of your device:

- Optical inputs (23, 24)

- Coaxial inputs (25, 26)

- USB B input (22)

- AES/EBU input (27)

Digital input sources

The input of a digital recorder must be connected to the digital outputs (20, 21). The signal on

the digital outputs depends on the selected source (e.g. DIG COAX, DIG OPT).

PLEASE NOTE: Incoming signals via the USB-B input (22) are not looped through the digital

outputs (20).

The included RC 3 remote control allows for easy and comprehensive control of your device.

All main functions can be controlled by the RC 3: On/Off, Source Selection, Station

Selection, SKIP, PLAY/PAUSE, and STOP.

By pressing the PLAY button briefly a second time, the PAUSE function is activated while in

CD mode. By pressing the STOP button briefly a second time, an inserted CD is ejected. By

holding down one of the SKIP buttons a little longer, the device switches into seek mode

(Fast Forward/Reverse).

If there is no CD inserted or the CD is not in playback mode, you can switch between the

different digital inputs by pressing the STATION buttons of the RC 3. Press PLAY to return to

CD mode.

If a variable output level has been activated in the personal setup menu (see 3.1.1), you can

control the output level of the analogue outputs of your CD 3.2 / CD 5.2 by pressing the

VOLUME buttons on your RC 3 remote control (see also 2.6).