Aqua Creek Products F-045SCH-02 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Cargador de batería Aqua Creek Products F-045SCH-02. Aqua Creek Products F-045SCH-02 13 páginas. 24v solar charger for use with revolution, scout and titan
Solar Charger Installation with Linak Controls
The CHARGER CABLE gets plugged into
the 24V in-out slot of the control box
which is located on the far right. Run
the battery cable along the side of the
CONTROL BOX bracket so it is out of the
way.
NOTE: Make sure the plug is fully
engaged into the control box. Make
sure the lights come on (see next page)
and the lift functions normally when
the 24V Solar Charger is installed. If
the lift does not function, check all
connections going into the control box
and make sure they are pressed all the
way in. When installed properly the
battery will charge as the lift operates
simultaneously.
8
Copyright © 2019 Aqua Creek Products All Rights Reserved
CHARGER
CABLE
24V
BATTERY
CONTROL
BOX
PLUG INTO
24V IN-OUT
(FAR RIGHT)
Revised 6/14/19