Dexter Power NC850RS Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Sierra Dexter Power NC850RS. Dexter Power NC850RS 20 páginas.

3. Quick clamping

4. Trigger switch

5. Handle

6. Hex key storage

SAFETY INSTRUCTIONS

In this manual and/or on the machine the following symbols are may used:

WARNING -To reduce the risk of injury, user must read instruction manual.

Class II machine – Double insulation – You don't need any earthed plug

Denotes risk of personal injury, loss of life or damage to the tool in case of non- observance of the instructions in

this manual

Indicates electrical shock hazard.

Immediately unplug the plug from the mains electricity in the case that the cord gets damaged and during

maintenance.

Wear eye protection

Wear dust mask

ASSEMBLY

Installing and removing the blades

Fig. 2

Always ensure that the machine is switched off and plug is removed from the power point before making any adjustment.

1. Turn the blade clamp counter-clockwise (see from the front).

2. Insert the blade into the slot of tool-less blade clamp.

3. Release the blade clamp to lock the blade.

Turn the blade clamp counter-clockwise to remove the blade.

NOTE: The blade may be installed with the teeth pointing either up or down, according to the needs of the cutting operation, but

the teeth must face forward

WARNING: When changing a blade immediately after operation, allow the blade to cool before removing to avoid possible

burning.

Pivot Shoe

Fig.3

The pivot shoe adjusts backwards and forwards to allow the entire length of the blade, exposing different areas of teeth on the

blade, or for special applications requiring a low clearance.

WARNING: To avoid injury and damage, do not operate the saw without the pivot shoe. The spindle may strike against the

workpiece and damage the reciprocating mechanism. Adjust the pivot shoe as necessary to make sure the blade will extend

Dexter Power

Original Instructions