Avnet AVT9152 EVB Manual de inicio rápido - Página 12
Navegue en línea o descargue pdf Manual de inicio rápido para Placa base Avnet AVT9152 EVB. Avnet AVT9152 EVB 16 páginas.
También para Avnet AVT9152 EVB: Manual del usuario (7 páginas)
Imprimir página
5 Set up AVT9152 EVB
This section provides a step-by-step guide on how to prepare AVT9152 EVB to start sending data to
AVT9152 demo web portal
5.1 Make sure the following jumpers are in place
AVT9152 EVB is shipped with jumpers on their default positions described in this section. User may go
straight to
connect the following pins with jumper wires
J18
J20
J23
J15
Header : Pin
J18 : 2-3
J20 : 2-3
J6 : 1-2
J16 : 1-2
J2 : 1-2
J2 : 3-4
J2 : 5-6
J2 : 7-8
J3 : 3-5
J3 : 4-6
J7 : 2-3
for the out-of-box demo.
J6
J21
Purpose
Set 5V DC Jack as the VDD_Supply source
Set 5V DC Jack as the VDD_5V_Arduino source
Enable AVT9152 module
Set to use SMA Antenna
Enable U2 LIS2DH12
Enable U3 I3G4250D
Enable U4 LPS22HB
Enable U5 2314277-1
Connects SENS_SCL nRF9160 P0.22
Connects SENS_SDA nRF9160 P0.23
Connects D0 to nRF9160 P0.15
if no jumper has been altered.
J12
J7
J2
J13
J3
Page 12
J22
J16