Avocent AMX 5130 Manual de instalación rápida
Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Avocent AMX 5130. Avocent AMX 5130 2 páginas. Switching system
También para Avocent AMX 5130: Folleto y especificaciones (10 páginas), Folleto (2 páginas), Folleto (8 páginas), Hoja de especificaciones (2 páginas)
Imprimir página
The following instructions will help you
to connect your AMX switching system.
For more detailed information, please consult
your installer/user guide.
Initial setup
Place your AMX switch and AMX5130 user
station in the desired locations. Rack mounting
brackets for the AMX switch are included for
easy rack installation.
1
Connecting power
Power down your systems. Attach one end
of each appropriate power cord to your AMX
switch and to your AMX5130 user station. Plug
the other end of each cord into an appropriate
AC wall outlet.
2
Connecting to the LAN
Insert one end of a UTP cable attached to your
LAN into the network port on the back of the
AMX switch.
3
Connecting the AMX5130 user station
to the AMX switch
Insert one end of a UTP cable attached to the
user station into a numbered user port on the
AMX switch for each user in your system.
4
Connecting the AMX switch to a server
Insert one end of a UTP cable into one of the
numbered server ports on the switch, and fas-
ten the opposite end into the RJ-45 port on an
To Contact Avocent Technical Support
Avocent, the Avocent logo, AMX and The Power of Being There are trademarks or registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2005 Avocent Corporation. All rights reserved.
Quick Installation Guide
AMX
™
Switching System
To install the AMX switch and the
AMX5130 user station
1
Connecting power
to the switch
AMIQDM
Module
1
Connecting power to
the user station
AMIQDM (dual port/multimedia) module. Plug the
AMIQDM module connectors into the appropriately
labeled ports on your server for each computer to be
connected to your AMX switch.
CALL (888) 793-8763
The Power of Being There
3
Connecting the
user station
AMX5130
User Station
NOTE: AMIQDM-PS2, AMIQDM-USB and
AMIQDM-VSN modules are available.
VISIT www.avocent.com/support
®
2
Connecting
to a LAN
AMX Switch
4
Connecting the
switch to servers
AMIQDM
Module
Serial
Port
DOWNLOAD www.avocent.com
590-487-501A