Avocent DSR 1024 Nota de publicación - Página 2

Navegue en línea o descargue pdf Nota de publicación para Interruptor Avocent DSR 1024. Avocent DSR 1024 2 páginas. Avocent dsr series dsr1024: install guide
También para Avocent DSR 1024: Folleto (2 páginas), Nota de publicación (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Nota de publicación (3 páginas), Nota de publicación (1 páginas), Nota de publicación (2 páginas), Manual complementario (2 páginas), Manual de instalación rápida (2 páginas)

DSR®1021, 1022, 1024 Switch Appliances

Release Notes – July 6, 2005

If the DSR switch appliance is not configured, the IP address must be entered using the console CLI port. Once

the DSR switch appliance is configured, it is accessible by entering its IP address into an Internet browser's

address bar.

The internal web interface utilizes local user accounts for authentication. The default username is "Admin" and

no password.

===============================================================================

Fixes

===============================================================================

This release of DSR switch appliance contains the following fixes:

1. Not applicable

===============================================================================

Known Issues

===============================================================================

This release of DSR switch appliance contains the known issues:

1. Not applicable

===============================================================================

Notes

===============================================================================

The following notes are applicable to this release:

DSR1021 –

1. Appliance is supported using DSView 2 or DSView 3 Software. If you are using DSView 2 or DSView 3,

please go to the respective product page under Avocent support for the latest firmware.

2. As of July 13

, 2005, the DSR1021 appliance will only ship with DSView 3 firmware code.

DSR1021, 1022, 1024 –

1. Appliances migrated to DSView 3 are now supported with direct IP access or DSView 3 software.

7/7/2005

Page 2 of 2