Avocent DSR Series DSR1022 Notas de la versión del firmware - Página 3

Navegue en línea o descargue pdf Notas de la versión del firmware para Interruptor Avocent DSR Series DSR1022. Avocent DSR Series DSR1022 3 páginas. Avocent dsr series dsr1021: supplementary guide
También para Avocent DSR Series DSR1022: Folleto (2 páginas), Nota de publicación (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Nota de publicación (3 páginas), Nota de publicación (1 páginas), Nota de publicación (2 páginas), Manual de instalación rápida (2 páginas), Nota de publicación (2 páginas), Manual complementario (2 páginas)

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030 DSRxx30.fl

DSR2035, DSR8035

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSR8035.fl