Avocent DSR Series DSR2030 Notas de la versión del firmware

Navegue en línea o descargue pdf Notas de la versión del firmware para Interruptor Avocent DSR Series DSR2030. Avocent DSR Series DSR2030 3 páginas. Avocent dsr series dsr1030: install guide
También para Avocent DSR Series DSR2030: Especificaciones de hardware (2 páginas), Nota de publicación (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Nota de publicación (3 páginas), Especificaciones (2 páginas), Manual de instalación rápida (8 páginas)

This document outlines:

1. Update Instructions

2. Appliance Firmware Version and Language Support Information

3. Enhancements

4. Fixes

5. Known Issues

6. Flash Update Failure Recovery

=============================================================

Please refer to your user manual for detailed instructions to update the

appliance.

Important Note:

1. If the appliance currently has a firmware version earlier than 3.2.0.17 (or

3.6.2.17 for DSR 1020, DSR 2020, or DSR 4020 switches) then the

appliance must first be upgraded to 3.2.0.17 (or 3.6.2.17 for DSR 1020,

DSR 2020, or DSR 4020 switches) before it can be updated with this

newest version.

2. Attaching the DSRIQ-VMC module to a Windows target may require the

USB CCID driver to be installed. If the user is prompted by the Windows

'New Hardware Wizard' the 'Next' button should be pressed.

3. For Avocent Power Management Distribution Units (PM™ 2003, 2006,

2024, 3003, 3006, and 3024 PDUs), PDU v110 firmware or higher is

required to be able to manage the PDU from a DSR switch.

DSR® x02x/x03x Switches

Firmware Release Notes

Version 3.7.0.13

Oct 28, 2008

Update Instructions