Avocent DSR Series DSR4020 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Avocent DSR Series DSR4020. Avocent DSR Series DSR4020 8 páginas. Avocent dsr series dsr1020: install guide
También para Avocent DSR Series DSR4020: Especificaciones de hardware (2 páginas), Nota de publicación (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Notas de la versión del firmware (3 páginas), Nota de publicación (3 páginas), Nota de publicación (2 páginas), Nota de publicación (1 páginas), Nota de publicación (2 páginas), Especificaciones (2 páginas)

Imprimir página
Avocent DSR Series DSR4020 Manual de instalación rápida
The following instructions will help you
to connect your DSR switch.
Should you require further assistance, please
consult your installer/user guide.
1
Connecting power to the
DSR switch
Power down all servers that will be part of your DSR
switching system. Locate the power cord that came
with the DSR switch. Plug one end into the power
socket on the rear of the DSR switch. Plug the other
end into an appropriate AC wall outlet.
2
Connecting the local port
Plug your VGA monitor, PS/2 or USB keyboard and
mouse cables into the appropriately labeled DSR ports.
3
Connecting a DSRIQ module to
the DSR switch
Choose an available port on the rear of your DSR
switch. Plug one end of a CAT 5 cable (4-pair, up to
10 meters) into a numbered port and plug the other
end into the RJ-45 connector of a DSRIQ module.
4
Connecting a server to the
DSRIQ module
Plug the DSRIQ module into the appropriate ports on
the back of the server. Repeat this procedure for all
servers that are to be connected to the DSR switch.
5
Connecting network and
remote users
Plug a CAT 5 cable from your Ethernet network into
the LAN connector on the back of your DSR switch.
Network users will access the DSR switch through
this port.
(Continued on reverse side)
Check our web site at www.avocent.com/support to search the knowledge base or use the online request.
Avocent, the Avocent logo, The Power of Being There and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2004 Avocent Corporation. All rights reserved.
Quick Installation Guide
DSR
®
Switch
DSR1020 | DSR2020 | DSR4020 | DSR8020
To connect a DSR switch
5
Connect the switch
to the network.
1
Power down all
servers and attach
the appropriate
power cord to the
DSR switch.
A1
Plug in the
keyboard,
monitor and
mouse for your
local connection.
7
Connect your
SPC device to
the target servers.
SPC Power
Control Device
Ethernet
Telephone
Modem
2
Local
Connections
Server
Server
Server
Server
The Power of Being There
network
6
DSR Switch
Plug in the
external modem.
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
3
Connect DSRIQ
modules to the
DSR switch.
4
Connect servers
to the DSRIQ
modules.
8
Power up target
servers and then
the DSR switch.
590-420-603A