Avocent SwitchView Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Interruptor Avocent SwitchView. Avocent SwitchView 17 páginas. Kvm switching solutions from your desktop
También para Avocent SwitchView: Manual del instalador/usuario (17 páginas), Especificaciones (4 páginas), Manual de instalación rápida (8 páginas), Manual de instalación rápida (2 páginas)

SwitchView

User Manual

Appendix

The following is a summary of all operational commands.

Key Sequence

Action

Selects an active channel via keyboard.

Configures the dwell time. Substitute nn with

a value from 2 to 60 seconds.

Enables the scan Go command.

Enables the scan Halt command.

Mouse will suspend scanning.

Mouse will not suspend scanning. (default)

If you hot-plug the SwitchView to a PC con-

nection you may experience a loss of mouse

signal. Use this command to restore the signal

if you're using a PC with a standard PS/2

mouse driver. (See page 8)

Use this command to restore the mouse signal

if you're using a PC with a Microsoft Intel-

liMouse driver. (See page 8)

Sets keyboard scan set; n is a number 1 - 3.

Displays the current firmware version of the

SwitchView processors. You must be at a DOS

prompt or in a text editor/word processor to

view this information.

Default Command Mode Activation

Changes the Command mode activation

sequence to <ALT> <ALT>

Changes the Command mode activation

sequence to <Shift> <Shift>

Changes the Command mode activation

sequence to <NUMLOCK> <->

Used to resynchronize the mouse after a hot-

plug. Repeat, if necessary, until synchroniza-

tion is re-established.

NOTE: Using this command while the mouse

is operating correctly will cause the mouse

to lose sync.