COZY VC201A-H and Manual de instrucciones de instalación y funcionamiento - Página 14

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Calentador de gas COZY VC201A-H and. COZY VC201A-H and 18 páginas. Gas-fired vented room heater
También para COZY VC201A-H and: Manual de instrucciones de instalación y funcionamiento (19 páginas), Manual de instrucciones de instalación y funcionamiento (18 páginas)

TSK WALL STAT KIT

WALL THERMOSTAT INSTALLATION INSTRUCTIONS

Your heater can be re-wired to operate with a millivolt wall thermostat by your installer. See wiring diagram

below for correct wiring.

NOTE: Do not disconnect the wire from the blocked flue switch to the "TH" terminal on the gas valve.

STEP 1.

Disconnect wire leading from Part #70080 (Bulb Control Switch) from valve.

STEP 2.

Cut the remaining wire leading from Part #70080 (Bulb Control Switch) to the blocked flue

switch, leaving its end connected to the blocked flue switch and leaving enough length to reach

the gas valve. Strip 1/2" of the insulation from the cut end of the wire.

STEP 3.

Connect one leg of thermostat wire to the "TH/PP" terminal on the gas valve.

STEP 4.

Connect second leg from the thermostat to the stripped wire coming from the blocked flue

switch. Secure this connection inside the heater cabinet.

STEP 5.

Secure both red wires from blocked flue switch inside heater cabinet. Make sure none of the

wires have enough slack to lay against the heat exchanger or draft hood.

BLOCKED

FLUE SWITCH

(VC/VCR-H SERIES HEATERS)

THERMOSTAT

WIRE

NUT

(Not provided)

OPTIONAL

Page 14

PILOT

GENERATOR