Avocent Cyclades PM20-L20A Manual de instalación rápida - Página 2
Navegue en línea o descargue pdf Manual de instalación rápida para Unidad de distribución de energía Avocent Cyclades PM20-L20A. Avocent Cyclades PM20-L20A 2 páginas. Cyclades pm series power distribution unit
También para Avocent Cyclades PM20-L20A: Hoja de especificaciones (2 páginas), Folleto (6 páginas)
Imprimir página
The following instructions will help you
connect your Cyclades PM IPDU.
Should you require further assistance, consult
your installer/administrator/user guide.
To Contact Avocent Technical Support
Avocent, the Avocent logo, The Power of Being There and Cyclades are registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. ©2006 Avocent Corporation. All rights reserved.
Quick Installation Guide
Cyclades
Intelligent Power Distribution Unit
To connect the PM IPDU (continued)
Using a terminal emulation program, start a session
with the following console port settings: 9600 bps
serial speed, 1 stop bit, no parity and no flow control, 8
bit data length and ANSI emulation.
Collect the following equipment prior to installing
and configuring the PM IPDU in a standalone
configuration: one or more RJ-45 to RJ-45 straight-
through cables, an RJ-45 to DB-9F straight-through
adaptor and a workstation running a terminal emulation
program such as HyperTerminal, Kermit or Minicom.
You can also connect the PM IPDU to a serial port
on other Cyclades management products. See
the appropriate documentation for installation and
configuration instructions.
NOTE: The system administrator must specify basic
settings on the PM IPDU before users can connect
to and manage the unit and the connected devices
CALL (888) 793-8763
The Power of Being There
PM
®
4
Logging in to the PM IPDU through
the console
From your terminal emulation application, log
into the console port as "admin." The default
password is "pm8."
If this is a first-time installation, see the Cyclades
PM IPDU Installer/Administrator/User Guide for
instructions on changing the default password,
adding users, assigning outlets to users, logging
in and using the console commands to manage
power on connected devices.
For additional information
For more instructions on installation and set up, visit
www.cyclades.com/support/downloads.php or refer
to the Cyclades PM IPDU Installer/Administrator/
User Guide.
VISIT www.avocent.com/support
®
DOWNLOAD www.avocent.com
590-680-501A