Biktrix 800S Manual - Página 6

Navegue en línea o descargue pdf Manual para Accesorios para bicicletas Biktrix 800S. Biktrix 800S 7 páginas. Display

Password/Speed Limit Setting

The speed display will show PSd. You are required to input the password for the display

to change the next settings. The default password for this display is "1919". Use the UP

and DOWN buttons to change a digit then press the POWER button to advance to the

next digit. When password is correctly entered you will be advanced to the Speed Limit

Setting parameter.

Speed Limit Setting

The speed display will show SPL. The milage display will show the current speed limit

for the bike's motor. Press the UP and DOWN buttons to adjust this. The value can be

set from 10km/h to 45km/h. Press the POWER button to save your changes and

advance to the next parameter.

Note that max speed is restricted by motor and controller – you may not be able to

reach the max speed set with motor power alone.

PAS Level Amount Setting

The speed display will show PAS. The mileage display will show options for number of

PAS assist levels. This can be changed to be either 0-3, 0-5 or 0-9. Default value is 0-5.

Use the UP and DOWN buttons to adjust this. Press the POWER button to save your

changes and return to the Kilometer/Mile parameter.