Aqua Medic Ocean Runner 3500 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Acuarios Aqua Medic Ocean Runner 3500. Aqua Medic Ocean Runner 3500 14 páginas.

Pump We recommend to us the

pump ( 3500 l/h).

Water reservoir - Water level in the filter tank

All open filter systems have to be planned in a way that in case of a circulation pump

failure they can take up water flowing back from the aquarium without creating an

overflow. The volume of water is depending from the construction of the overflow

device, the pump capacity and the aquarium surface. The water volume can be

calculated by taking the aquarium surface (length x width) and the build-up above the

overflow level respect. the overflow comb. In most cases, the build-up is 2-3 cm.

During normal operation, the filter tank can be only filled to a height that this water

volume is taken up in case of emergency. The minimum water level is determined

through the height of the pump suction opening. It has to be made sure that the

pump does not suck any air. Otherwise fine air bubbles are blown into the water

which create a lot of slurp noises. If the pump runs dry, it may get damaged

irreversibly. The water which evaporates within the aquarium, is only missed in the

filter chamber - in the aquarium itself, the water level will be maintained. For this

reason, the water level has be controlled and replenished regularly. The refilling can

be made easier by using the

storage tank in order to keep the water level constant. Nevertheless, it is suitable to

mark the minimum and maximum levels directly at the tank.

Ocean Runner 3500 as circulation

aquaniveau in combination with a

installation:

1. Overflow chamber with

comb

2. Hole in the aquarium bottom

3. Outlet pipe

4. Trickle filter modules

5. Circulation pump

6. Inlet pipe to the aquarium