Aqua Medic Turboflotor Blue 1000 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Acuarios Aqua Medic Turboflotor Blue 1000. Aqua Medic Turboflotor Blue 1000 7 páginas. Protein skimmer for fishes
Imprimir página
aquarium frame is prevented. Both adjusting screws at the bottom are supplied with silicone
suction cups for increased safety. The skimmer is now ready for use and can be started.
Set up: beside or inside the filter tank of a sump or under tank filter system (fig. 4):
The Turboflotor Blue 1000 can also be used in a sump or under tank filter system. It can be placed
either in- or outside the filter.
See the above hang-on procedures for installing the skimmer on the outside of the filter tank. t is
attached to the frame of the filter tank. If the filter tank is not high enough, the skimmer is placed
beside the tank. For the return flow, outflow boxes may be used. If the water level in the filter tank
is very low, or there is a shortage of space in the tank, the 90°-elbow fitting may be connected to
the outlet and the water will then directed down to the water surface in the tank. This avoids
splashing and reduces noise. The venturi pump is fixed inside the filter tank, in such a way, that it
will not run dry and that the length of the pressure tube be kept as short as possible (fig. 4). The
pump should be placed close to the water surface. To prevent the pump running dry, we
recommend using an automatic level controller (e. g. aquaniveau or Niveaumat) to ensure
replacement of evaporated water and to keep the water level in the filter constant.
1. Pump
2. Filter sump
3. Overflow
4. Return pipe to aquarium
Fig. 4: Turboflotor Blue 1000, set up adjacent to the filter tank of a sump or under tank filter
5