BIL Skoots SK5000 Manual del operador Instrucciones originales - Página 2
Navegue en línea o descargue pdf Manual del operador Instrucciones originales para Equipamiento industrial BIL Skoots SK5000. BIL Skoots SK5000 12 páginas. Moving system
También para BIL Skoots SK5000: Manual (9 páginas), Instrucciones de uso y mantenimiento (2 páginas)
Imprimir página
W
e hereby declare that the load moving system below complies with and fulfils
all of the relevant provisions of the following directive...
2006/42/EC – The Machinery Directive (and its amending Directives)
The product has been designed and manufactured to the following specification:
Product description:
Make:
Model numbers:
Manufactured by:
Address:
Signed .............................................................................. Date: 1st February 2015
Name: Mark Farrell
Read and completely understand the contents of this Operator's Manual before operating
the Skoots. Failure to read, understand, and follow instructions in this manual may result in
personal injury, death or property damage. Prior to use, internal risk assessment should be
undertaken by a competent person to evaluate health and safety risks within the proposed
working area and transportation route.
Skoots are designed to be used as a minimum two man operation i.e. one man per Skoots
unit on opposing ends of the load. Never attempt to lift or transport loads as a single man
operation. Keep Skoots in an upright position at all times including during transportation and
storage to avoid airlocks in the hydraulic jacks. If an airlock is present then refer to Fault
Finding on page 8.
If you do not understand any part of this manual, or if you have any questions, please contact
BIL Group Service & Support on... +44 (0)1249 822 222.
IMPORTANT: Keep these instructions with your Skoots.
2
Skoots
EC Declaration of Conformity
Mobile or movable jacks and associated lifting equipment:
EN 1494:2000 + A1:2008
Load lifting and moving system
Skoots
SK600, SK900, SK1400, SK2000, SK3500 & SK5000
BIL Group Ltd
Porte Marsh Road, Porte Marsh Industrial
Estate, Calne, Wiltshire, SN11 9BW
The technical documentation has been
completed by Mark Farrell, Managing Director.
Position: Managing Director
CAUTION:
SK600 to SK5000
®