Bilanciai DD1010 Inicio rápido - Página 2

Navegue en línea o descargue pdf Inicio rápido para Accesorios Bilanciai DD1010. Bilanciai DD1010 2 páginas. Weighing terminal
También para Bilanciai DD1010: Inicio rápido (2 páginas), Inicio rápido (4 páginas)

Imprimir página
Bilanciai DD1010 Inicio rápido
DECLARATION OF CONFORMITY
N° dd1010_1
SOCIETÀ COOPERATIVA BILANCIAI A.R.L.
Via S. Ferrari, 16
We:
41011 Campogalliano (MO) - Italy
declare under our responsibility that
the product: Electronic weighing terminal DD1010
and its options
described in this declaration complies with:
Electromagnetic Compatibility 2004/108/EC
Directives: Low voltage 2006/95/EC
Non-automatic weighing instrument 2009/23/EC
Conformity is ensured by complying with
EN 61000-6-3, EN 61000-6-4
standards: EN 60950
EN 45501
The terminal is also suitable for producing non-automatic weighing in-
struments, approved with "EC type-approval certificate" in compliance
with Directive 2009/23/EC (ex. 90/384).
The CE marking has been applied on the product.
01/02/2013
Campogalliano, (date) ............................
Management Division
Franco Brighenti
WARNINGS
Do not install in environments with presence of potentially
explosive gas or powders.
•
This appliance cannot be disposed of as municipal solid
waste.
•
It must be disposed of separately.
For further information, refer to the site www.coopbilanciai.it.
SOCIETA' COOPERATIVA
BILANCIAI
Strumenti e Tecnologie per Pesare
Società Cooperativa Bilanciai Campogalliano - 41011 Campogalliano (MO) Italy
Via S. Ferrari, 16 - Tel. +39 (0)59 893 611 - Fax +39 (0)59 527 079
Web: http://www.coopbilanciai.it - E-mail:[email protected]
Customer Service Tel. +39 (0)59 893 612 - Fax +39 (0)59 527 294
5.
RcD Weighing
1
Reset the instrument.
2
Place the empty vehicle on
the weighing platform.
3
Generate entry printout.
4
Remove the vehicle from the
weighing platform.
5
Recall code RcD:
•
Select the newly-perfor-
med weighing operation
RcD
and press "OK".
6
Place the loaded vehicle on
the weighing platform.
7
Generate exit printout.
6.
RcP/RcA Weighing
1
Reset the instrument.
Place the loaded vehicle on
the weighing platform.
2
3
Recall code RcP (or RcA):
•
Select the vehicle code
and press "OK".
or (if there is no relative
RcP
code):
•
•
4
Generate exit printout.
Enter
the
vehicle
data in a new code
and confirm.
Select the new code
and press "OK".