Aqua Medic CO2 complet Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Producto para el cuidado de mascotas Aqua Medic CO2 complet. Aqua Medic CO2 complet 8 páginas.

Imprimir página
the pH value. At pH 7.1 – 7.4 for freshwater and 8.1 – 8.4 for seawater the balance between free
CO
and carbonate hardness is reached. In this range, the CO
2
independent of the carbonate hardness.
4. bubble counter
Bubble counter with integrated non return valve and a strong mounting plate. The bubble counter
has to be mounted in a way, that he is always without pressure. The needle valve has to be
mounted between the CO
Content
1. CO
inlet, from the CO
2
2. CO
exit port to the aquarium/CO
2
3. transparent counter tube
4. plug with connections
5. non return valve, with silicon"umbrella"
6. connection fitting, 1/6"
7. bubble inlet tube
8. holding clamp
9. holding plate
10 . rubber succer
Connections:
- inlet: flexible tube, 6/4 mm diameter. It is
connected to the fitting with the tranparent acrylic
pipe , going to the bottom of the counter and the non return valve
- outlet: flexible tube, 6/4 mm diameter.
Installation:
The mounting plate of the counter is fixed to the wall or the aquarium stand, near the CO
It can either be mounted with the rubber succers on a glass plate (aquarium) or directly with
screws on the wall. The bubble counter is then opened carefully, filled for 1/3 with water, closed
again and carefully pressed into the holder. Take care to keep the O ring of the plug and the top
part of the transparent counter tube dry. If these parts are wet, the counter will not be CO
If both tubes are connected to the CO
the reactor can be opened. Now bubbles can be seen and counted at the bottom of the thin acrylic
tube. The quantity of the bubbles can be adjusted at the needle valve.
Maintenance
If the water in the bubble counter is evapüorated, it has to be renewed.
5. Assessories
As an assessory, to automise the CO
between pressure regulator ( regular) and bubble counter, as a night shut off. The CO
then only switched on during daytime (together with the light), when the plants use CO
optimum method is, to control the solenoid valve by an pH computer. The CO
atomatically balanced with the needs, the pH value is kept constant.
6. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
bottle and the bubble counter.
2
pressure bottle
2
reactor
2
reactor (or the filter) and the pressure, the needle valve of
2
supply , the Aqua Medic solenoid valve can be connected
2
quantity is not dangerous for fish,
2
-supply is then
2
bottle.
2
tight.
2
supply is
2
. The
2
7