ALLIED MEDICAL Ki Mobility Catalyst 5 Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Silla de ruedas ALLIED MEDICAL Ki Mobility Catalyst 5. ALLIED MEDICAL Ki Mobility Catalyst 5 11 páginas.
Imprimir página
Adjusting Back Angle
1. Using a 5mm Allen key and a 10mm spanner remove screw (E) and nut (C).
2. Re-install screw (E) into the hole that gives the desired angle for the back post
3. Secure the back post by tightening the screw and nut (C)
4. Repeat on opposite side
Adjusting Front Seat Height
Note: There are different size options of forks and different height options with the holes in the
forks as shown in the diagram below:
Each hole is ½ an inch. You may require a different fork if you need to change the front seat height
by one inch or more. There are also 3 lengths of fork stem. Standard, ¾" extension and 1 ½"
extension. These may also be needed to change the height.
To adjust:
1. Remove the bolt (C) by using two 13mm spanners.
2. Re-install castor at new position on fork to achieve desired height ensuring the two spacers (E)
are fed through bolt on either side of the castor
3. Secure the with nut (A) using two 13mm spanners
4. Check that the castor spins freely
5. Repeat steps on opposite side