Avonic CM55-VCUC Manuales de usuario - Página 6
Navegue en línea o descargue pdf Manuales de usuario para Cámara de seguridad Avonic CM55-VCUC. Avonic CM55-VCUC 17 páginas. Usb 2.0 compressed hd ptz camera
Imprimir página
1 HOME button
Press
button, camera moves to initial
HOME
position where both pan and tilt angle is zero.
2 Camera Selection Button
Used to switch among 4 cameras, press 1-4
number buttons to control cameras with 1-4
address respectively. For example, press
button 1 to control the camera with address 1.
3 Focus
Press "AUTO" button to switch to Auto Focus
mode, press "MANU" button to switch to
Manual Focus mode.
" "button to Focus Near
"
"button to Focus Far
"
"button to Auto Focus once every time it is
pressed, then switch back to Manual Focus
mode.
4 Iris
Press"
"button to reset iris value to default.
" "button to Iris Open
" "button to Iris Close.
5 Menu
Press
button to enter / exit menu.
MENU
6 Data
Press
button to turn on / off display of pan
DATA
tilt angel, zoom times and title info
7 Number Keys
Used to input numbers, for example, preset
number.
8 Cancel
Used to delete number inputted.
9 Power
After the camera has been connected to power
source, in none-menu status, press this button
to turn on / off the camera.
10 Reserved buttons（F1, F2, F3, F4）
These buttons are reserved for future use.
11 Pattern
Used to activate Pattern Scan1 and Pattern
Scan2.
12 BLC
Used to open / close back light compensation.
13 Zoom
Used to adjust zooming times.
" "button to zoom in
" "button to zoom out.
14 Back
Press"
"button to go back to previous menu.
15 OK
www.avonic.eu
In None-menu status: press this button to
switch among pan / tilt control speeds.
In Menu status: get into relative menu option
after it has been selected.
16 Direction / Menu Operation
In None-menu status: press these four buttons
to pan left/right and tilt up/down.
In Menu status: or button to select among
menu options,
or
17 Preset Setting
" " button to call a preset.
Input number key(s), and then press this button
to call a preset.
" "button to set a preset.
Move the camera to a specific position, adjust
focus value and etc., and then press this button
to set a preset.
" "button to clear a preset.
Input number key(s), and then press this button
to clear a preset.
18 Enter
After inputting numbers, press this button to
confirm.
6
to change option / value.