Billet Specialties Tru Trac # 13805 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Motor Billet Specialties Tru Trac # 13805. Billet Specialties Tru Trac # 13805 11 páginas. For systems without a/c, small block chrysler

Imprimir página

Figure 1: Install Fuel Pump Block-Off

A] Sparingly apply RTV silicone to the timing cover surface and gasket.

Attach the fuel pump block off with the two 3/8-16 x 3/4" button head

cap screws and tighten firmly.

B] Thread the 3/8-16 x 2-3/4" button head cap screw into the timing cover

by the fuel pump block off and tighten firmly.

2-7/16" From Timing Cover

Figure 2: Install Block Mounting Studs

Apply RTV silicone to one end of the four 3/8-16 x 5-1/2" threaded studs

and the two 3/8-16 x 2-1/2" threaded studs.

A] Thread the silicone side of the 5-1/2" studs into the upper four holes in

the timing cover.

Important! Leave 2-7/16" of thread exposed from the timing cover face.

B] Thread the silicone side of the two 2-1/2" studs into the bottom two

holes of the timing cover.

Important! Leave 2" of thread exposed.

Double-check your lengths.

The studs can easily be tightened by threading two 3/16" zinc coated

nuts (supplied) onto the stud and tighten them against each other to act

as a drive nut (discard after use).

*Example

2" From Timing Cover