AvonSynth AVS-VCA-1 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Amplificador AvonSynth AVS-VCA-1. AvonSynth AVS-VCA-1 4 páginas. Dual vca eurorack module

The

User Guide

Thank you for purchasing from AvonSynth

Congratulations on your purchase of a brand new AvonSynth AVS-VCA-1

Dual VCA Eurorack Module. We trust that it will both serve and inspire you

as you create beautiful music with it for years to come.

In order to get the most out of your module, please ensure that you read

this User Guide in its entirety so that you fully understand all of its

functionality, and that you follow all necessary safety directions during use.

Included in the Box

1 x Dual VCA Module

Installation

Step 1: Power your system oﬀ. Place the module in your Eurorack-

compatible rack in any convenient position. Aﬃx the module to your

rails using the included mounting screws and nylon washers.

Neglecting to use these washers may result in unnecessary marking

of the unit.

Step 2: Triple check the polarity of the power connector before

connecting the power cord to your power supply. Ensure that the -12v

line marked on the back of the module connects to the same end of

the ﬂat-cable that also connects to the -12v line on your power supply.

While AvonSynth modules use shrouded connectors that make this

process safer and more reliable, some systems do not conform to this

polarity standard, so careful checking is always necessary.

Connecting the module with incorrect polarity can result in damage

done to the module which cannot be covered by warranty.

Step 3: Power up your system and start patching!

www.AvonSynth.com

1 x 10 pin to 16 pin

ﬂat-cable power cord

AVS-VCA-1

Dual VCA

4 x M3 Mounting Screws

4 x Nylon Washers

Page 1 of 4