Billi Sahara Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Cocina & Accesorios de baño Billi Sahara. Billi Sahara 12 páginas.
También para Billi Sahara: Manual de instalación (8 páginas), Manual de instalación (7 páginas)

Imprimir página
Billi Sahara Manual del usuario
User guide
Billi Sahara & Sahara Plus.
Options & Operation
To operate, simply press the left lever to
dispense boiling water and the right lever
to dispense chilled . When lifted the levers
will latch for continual delivery, until released
with a light press .
Operating modes can be selected by the
user by entering Options Mode .
Within the options mode, you can set the safety
switch through the hot water lever and power
save mode through the cold water lever .
See below for further instructions .
—To enter the options mode:
1 . Turn on the unit and wait for normal
operation (icons are both illuminated
constantly) .
2 . Push both the hot and cold levers
down & then while holding the two
levers down press the safety switch
at rear of tap . Hold both levers and
safety switch for 3 seconds .
3 . Icons will flash yellow .
4 . Release both the levers & safety switch .
5 . Unit is now in options mode .
6 . If you wish to change or set the safety
switch mode, follow the safety switch
settings procedure below . If you wish
to change or activate the power saving
mode follow the power save mode
settings procedure below .
—Safety Switch settings
The
Red
padlock indicates the different safety
settings enabled . To change or activate a
setting once in options mode as above, press
and release the hot (left) lever to scroll through
the following options;
– Red Icon Off: indicates the hot tap is
disabled .
– Padlock icon on, Red icon off: indicates
safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled .
To save new setting and exit Options Mode,
touch the safety switch and release . Wait 10
seconds for unit to return to normal operation .
— Power save mode settings
(EcoIntelligence, standby or on 24/7)
The
Green
icons on the tap indicates the
power save level that is selected . To change
or activate a setting once in options mode,
press and release the ambient (right) lever
to scroll through the following options;
– Green leaf on: indicates Eco Intelligence™
self learning timer is enabled .
– Green moon & stars icon flashing:
indicates Standby Mode is enabled .
– White Icon On: indicates system is in
24 hour continuous mode .
To save new setting and exit Options Mode,
press the safety switch and release . Wait 10
seconds for unit to return to normal operation .
—Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing .
5