Aqua One Inspire 40 Manual de instrucciones de montaje - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior Aqua One Inspire 40. Aqua One Inspire 40 9 páginas.

Imprimir página

Step 9

Fit the Right Side

Push the Right Side

down onto the assembly.

Use a screwdriver to

tighten the 6 Large

Locking Nuts fitted to the

Base and Rails.

Insert a screwdriver into

the 2 Hollow Core

Locking Nuts and turn

the nuts inside as far as

they will go.

Step 10

Fit the Overbalance

Strap

To prevent possible

overbalancing this unit

must be secured to a

suitable wall by fitting of

the overbalance

protector kit to the unit.

Wall fixings are not

supplied as they will

need to suit the wall type.

Note: Take care when

drilling the wall that

you do not drill into any

pipes, wires etc.

If in doubt, consult an

expert.

Step 11

Prepare the Door

Make sure the Hinges

are pushed in at 90

degrees to the edge of

the door before screwing

them into place.

Wall fixing

(not supplied)

Example

i l

R a

T o p

Washer

Screw

Washer

Screw

(not supplied)