CP Plus CP-DBP-H20-PGW Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Videocámara CP Plus CP-DBP-H20-PGW. CP Plus CP-DBP-H20-PGW 8 páginas. Full hd body worn camera
Imprimir página2.5 Menu Introduction
2.5.1 Main Menu
In the real-time video interface, press menu button to enter the main menu. The main menu includes Video Setting,
Platform Configuration, Function Setting, System Configuration, Wireless Network, Equipment Information.
In the menu interface, the menu button is the sure button, the up button is selecting previous, and the down button
is selecting latter.
2.5.2 Video Setting
Users can set video parameters. The higher the relevant parameter is, the clearer and smoother the video is.
Following are video settings:
●Resolution: 2688×1512, 1920×1080
(1080P is set as default. The higher the resolution, the clearer the video.)
●Video Frame Rate: 1/5/10/15/20/25/30
(1/30 is set as default. The higher the frame rate, the clearer the video.)
●Video Bit Rate: low/medium/high
(High is set as default. The higher the bit rate, the clearer the video.)
●Recording Mode: auto/manual
(Auto is set as default when the device is opened. Users have to manually enable the manual mode.)
●File Length: 5min/10min (Ten minutes are set as default.)
●Record Delay: Off/5s/10s/20s/30s (Five seconds are set as default.)
●Record Cover: on/off.
(Off is set as default. After enabling record cover, old video files will be automatically covered by newer ones when the capacity is full, while files that are
marked important will not be covered.)
2.5.3 Platform Configuration
Configure the platform. The better the configuration, the clearer and smoother the video.
●Live Resolution: 1280*720, 720*480, 352*288 (The higher the resolution, the clearer the video.)
●Live Frame Rate: 1/5/10/15/20/25/30 (The higher the frame rate, the clearer the video.)
●Live Bit Rate: low/medium/high. (The higher the frame rate, the clearer the video.)
Setting References:
Platform Server: enable
Device ID: (default ID)
Server IP: IP address of the server
Server Port: port number of the server
After setting the platform, the device can connect to the platform automatically when connecting to the network.
2.5.4 Wireless Network
Select network type to connect.
●Network Type: WIFI/4G (Enable WIFI/4G function.)
USB Network (When connecting the device to PC via USB, users can use network adapter to visit the web client of the
device using PC. See the appendix for USB settings.)
USB Series Port: (for program copying)
●WIFI: Enter
First select WIFI/4G as the network type and enter the WIFI configuration page. Enable WIFI and the device will
search signal and strength of WIFI that surrounds the device. Users can use up and down buttons to select a WIFI and
press "Enter" to eject the keyboard. (User Up/Down/Record/Photo buttons to move the cursor.) Enter the WIFI password
to connect the WIFI. Return to the real-time video interface to check if the WIFI icon is on. When WIFI works, the device
can directly connect to the platform after configuring the platform.
●WIFI AP: Enter
Select WIFI AP to enter the setting interface, press "Enter" button to enable the function. Enter SSID number and
password and click OK to save changes. Return to the real-time video interface to check if the WIFI AP icon is white.
When a 4G card is inserted to the device, configure the WIFI AP hotspot to let other devices connect to the network
by connecting WIFI AP.