CPA CPA-0010-01009D01 Manual de uso e instalación - Página 4

Navegue en línea o descargue pdf Manual de uso e instalación para UPS CPA CPA-0010-01009D01. CPA CPA-0010-01009D01 7 páginas. Standby ups

CPA-0010-01009D01

User's Manual

Connect Com. Port and Install Software

(Only for models with a USB port)

Connect one end of the USB cable to PC and the other to the USB port at the rear of the UPS.

Download the latest version of ViewPower software from http://www.power-software-download.com to your hard

drive. Follow on-screen instructions to complete the software installation.

I/O Port Connections

The UPS has an RS232 DB-9 Port to provide remote monitoring of the UPS status.

Typical internal circuit of the RS2323 DB-9 Port: -

Note: - the outputs are rated for DC voltages only, maximum 24 DC, 1A.

LCD OVERVIEW

1.Input voltage

2. Load level indicator, flashing indicates overload

3. Output voltage

4. AC mode indicator

5. Battery capacity indicator, flashing

6. Battery mode indicator, indicates low battery

LED Indicators

LED

• Green

*Yellow

o Green

• Red

*LED on or LED Off* LED flashing

Alarm

Off

Sounding every ten seconds

Sounding every second

Output voltage

Continuously sounding

Uninterruptible Power Supply

UPS Status

The mains is normal and UPS is operating

normally.

Power failure occurred and UPS is on battery

mode.

Low battery

UPS is off

UPS fault

Page 4