CPAP C-150 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Fuente de alimentación CPAP C-150. CPAP C-150 16 páginas. Super cpap power pack

SUPER CPAP POWER PACK OPERATION

CONNECTING THE POWER PACK TO A CPAP MACHINE

NOTE: PRODUCTS MANUFACTURED BY RESMED

SHOULD NEVER BE POWERED VIA DC CONNECTIONS

AS IT WILL RUIN THE DEVICE. ResMed products should

only be connected via a Sine Wave Inverter. (see page 8)

Connect DC Power Cord to the DC IN/OUT jack (B) on CPAP

Power Pack.

Connect the DC Power Cord to the DC in/out jack located on

the CPAP machine.

If the DC Power Cord will not directly fit in the CPAP machine

you will need to use one of the Universal Connectors provided

to complete the connection between the Power Pack and the

CPAP machine.

Determine which Universal Connector fits in the DC in/out jack

on the CPAP machine and attach that connector to the end of

the DC Power Cord. Then connect the DC Power Cord to the

Power Pack. If you have trouble locating the correct connector,

please refer to additional instructions on the next page.

Once the connection between the Power Pack and the CPAP

machine is complete, press the ON/OFF button on the CPAP

machine. Your CPAP machine should start functioning.

- 6 -