CPAP C-222 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Fuente de alimentación CPAP C-222. CPAP C-222 16 páginas. Super cpap power pack

OPERATION

CONNECTING THE POWER PACK TO A CPAP

MACHINE THAT DOES NOT HAVE A DC IN/OUT JACK

If your CPAP machine does not have a DC in/out jack, you will

need to use the 150 Watt or 225 Watt Sine Wave Inverter (sold

separately) in addition to the Power Pack.

NOTE: PRODUCTS MANUFACTURED BY RESMED SHOUD

NEVER BE POWERED VIA DC CONNECTIONS AS IT WILL

RUIN THE DEVICE. ResMed products should only be connected

via a Sine Wave Inverter.

225 WATT SINE WAVE INVERTER

150 WATT SINE WAVE INVERTER

Dimensions: 5.25" x 2.75" x .5"

Dimensions: 4.5" x 4.5" x 1.75"

Weight: .5 lb

Weight: 1.3 lbs

150 or 225 WATT SINE WAVE INVERTER OPERATION

Unpack the Sine Wave Inverter.

Connect the Sine Wave Inverter adapter cord to the side of the

Inverter.

Connect the opposite end of the adapter cord into the DC

IN/OUT jack (B) of the Power Pack.

Connect the regular power cord of your CPAP machine to the

Inverter. To connect the power cord to the inverter, slide the

small spring loaded button, found on the bottom of the Inverter,

back which will reveal the two (2) prong connection.

- 8 -