CPcam CPD505ZHD Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para DVR CPcam CPD505ZHD. CPcam CPD505ZHD 8 páginas.

1. SPECIAL NOTES

Disclaimer

We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any

legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this

manual is subject to change without notice.

For the actual display and operation, please refer to your DVR in hand.

VGA Output Resolution Support

Users are allowed to change the resolution depending on their display monitor.

Go to "ADVANCE"

There are seven options as follows:

1). 800 x 600

2). 1024 x 768 (default)

3). 1280 x 1024

4). 1440 x 1050

5). 1400 x 900

6). 1680 x 1050

7). 1600 x 1200

Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output

resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor

and DVR are consistent.

If the image is not positioned or scaled properly, please go to your monitor's menu for adjustment.

For details, please refer to the user manual of your LCD monitor.

2.1. Front Panel

1) LED Indicators

POWER: The DVR is powered on.

STANDBY: The DVR is in the standby mode.

HDD: The HDD is reading or recording.

HDD Full: The HDD is full.

ALARM: An alarm is triggered.

TIMER: Timer recording is turned on.

PLAY: The DVR is in the playback mode.

REC: The DVR is in the recording mode.

2) USB port

To quickly backup or upgrade firmware/OSD, you can insert a compatible USB flash drive into this USB port.

Before using the USB flash drive, please use your PC to format the USB flash drive as "FAT32" first.

"DISPLAY", and move to "VGA OUTPUT" to select the VGA resolution you want.