CPE 100189 Manual del usuario e instrucciones de funcionamiento - Página 12

Navegue en línea o descargue pdf Manual del usuario e instrucciones de funcionamiento para Accesorios para bicicletas CPE 100189. CPE 100189 16 páginas. Bike carrier

Imprimir página
MOUNTING

Tilt Down feature

For access to the rear of vehicle, with the bikes removed
from the rack, securely grasp bike rack, remove main
locking pin (through centre of tube) (A), while continuing
to grasp the rack, remove the back-up pin (under main bar)
(B), and allow the rack to tilt downward . DO NOT drop or
allow the rack to be unsupported while the pins are out,
this may damage the rack and/or cause injury .
WARNING
DO NOT attempt to pull out the main locking pin or
back-up locking pin while there are bikes mounted
to the carrier .
CAUTION
When traveling, the bike carrier must be locked in
the horizontal or upright position . DO NOT operate
the vehicle if the carrier is not locked into place .
WARNING
Failure to properly insert and twist locking pin can
cause damage to bikes, vehicles and possibly cause
injury .
12
Travel / Storage feature
When traveling without bicycles, the bike carrier can fold in
the upright position . With the bikes removed from the rack,
twist and remove the locking pin from the centre hole . Fold
the main centre bar to horizontal position (down on either
side) and re-secure using locking pin . Securely grasp bike
rack, remove main locking pin (through centre of tube), lift
the rack to the upright position and re-secure locking pin to
hold in upright position .
A
B
NOTE
The bike carrier can be put in the upright position
with the secondary (3-4) bike carrier attachment
installed .
100189
ENGLISH