Allied Telesis AT-GS950/8POE Ficha de datos
Navegue en línea o descargue pdf Ficha de datos para Interruptor Allied Telesis AT-GS950/8POE. Allied Telesis AT-GS950/8POE 2 páginas. 8 port gigabit fanless poe websmart switch
Datasheet |
Switches
AT -GS950/8POE
8 port Gigabit Fanless PoE WebSmart Switch
AT -GS950/8POE-xx
8 port 10/100/1000T PoE WebSmart switch
with 2 SFP combo ports
Performance
Allied Telesis' WebSmart switch integrates the
simplicity of unmanaged switches with the
performance and reliability of managed switches
to provide a cost-effective solution for users
to integrate management at the edge of their
network.This WebSmart switch provides a
network manager some key features using
the simple web-based management function such
as; port-based VLANs, IEEE 802.1p QoS, port
trunking/link aggregation, port mirroring, priority
queues and IEEE 802.1x security support. With
support of up to 8K MAC addresses, a 128K
packet buffer and a fanless design, the
AT-GS950/8POE is an ideal option for integrating
management into your network solution.
Power over Ethernet
Capable of providing up to 4 ports of Class 3
(15.4W), the AT-GS950/8POE is ideally suited
for those applications using security cameras,
wireless access points, IP phones, and other PoE
powered devices.The PoE option eliminates the
need for power rewiring and minimizes the
clutter of power supplies and adapters in
awkward places.The silent, fanless operation is
perfect for the classroom and other low-noise
requirement application.
Value
Never thought you could afford managed
switches in your network? Always wanted to
provide management functionality at the edge?
Now's your chance. Allied Telesis' WebSmart
switch truely helps network managers get the
most value for their dollar. With industry
standard protocols, fiber media support via
the SFP's and simple Plug and Play usability
right out of the box how can you go wrong
implementing this cost-effective solution into
your network?
Allied Telesis
Key Features
Basic features
•
Complies with IEEE 802.3, IEEE 802.3u,
IEEE 802.3z/ab, IEEE 802.3x
•
8 10/100/1000Mbps auto-sensing, auto MDI-X
switching port
•
2 individual SFP for combo ports that
supports 100/1000Mbps (combo with ports 7
and 8), optical port has the higher priority
•
PoE support (full 15.4 W on ports 1-4)
•
Support backpressure flow control at half-
duplex, IEEE 802.3x flow control at full-duplex
•
Head of Line (HoL) blocking prevention
•
19-inch rack-mountable
•
Internal power supply
•
Standard 1U chassis high
•
Fanless design
•
1Mbit (1024 kilobit) on-chip buffer memory
Smart function support
•
VLAN ID's available: 4K
•
Max VLANs: 200 tagged + 56
port-based•
Web-based configuration interface
•
Port-based VLANs
•
IEEE 802.1p-based QoS support, four priority
queues per port
•
IEEE 802.3ad port trunking (four groups)
•
Port setting / configuration
•
IEEE 802.1D Spanning-Tree, IEEE 802.1w
Rapid Spanning-Tree
•
SNMP v1, v2
•
Storm control
•
Jumbo frames, up to 9KB
•
Port setting on speed, flow control, and on-off
•
Port mirroring
•
Dynamic Host Configuration Protocol
(DHCP)
•
IEEE 802.1x port-based authentication
•
Factory reset with hardware push button and
software backdoor password
•
Configuration backup/restore via TFTP / HTTP
•
Password Access Control and restricted IP
access list
•
Firmware upgradeable via TFTP/HTTP
•
RFC 1213 MIB II, RFC 1643 Ethernet Interface
MIB, RFC 1493 Bridge MIB, Private Enterprise
MIB
•
RFC 2131 DHCP client
•
IGMP snooping v1 and v2
•
RMON (history, statistics, alarms and events)
•
ACL's – drop or rate limit based on: source and
destination MAC-based, source and destination
IP address, protocol,ToS/DSCP, port, VLAN,
Ethertype
PoE features
•
Auto-sensing algorithm - automatically
detecting Power over Ethernet terminals and
supplying inline power
•
LED display of per-port-PoE status supported
•
Supports IEEE 802.3af Data Terminal
Equipment (DTE)
•
RJ-45 wire pairs 4-5, 7-8 for power
transmission
www.alliedtelesis.com