AVS Ventvisor Manual de instrucciones de instalación

Imprimir página

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Important Safety Information

• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Contents - 2 Piece Set

Contents - 4 Piece Set

Front Driver

Side Visor

Tools Required

Car Wash Supplies

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

Clean the metal door frame around the

window with an alcohol pad.

Installation Instructions

Ventvisor

NOTE: Actual product may vary from illustration.

Front Driver

Side Visor

Front Passenger

Side Visor

Clean Towel

NOTE: Actual application may vary slightly from illustrations.

Deflector

Front Passenger

Side Visor

Rear Driver

Rear Passenger

Side Visor

Nut Driver

Remove tape liner from frear flange. Peel back 2"

(5 cm) of tape line from each end of top flange.

free end

rear

flange

Page 1 of 3

I - Sheet Number VV31 Rev.C

Alcohol Pad x2

Alcohol Pad x4

Phillips Screwdriver

top flange

free end

front

flange