CPG HP212 Instrucciones de instalación y funcionamiento - Página 5
Navegue en línea o descargue pdf Instrucciones de instalación y funcionamiento para Gamas CPG HP212. CPG HP212 12 páginas. Countertop range
Imprimir páginaInstructions are for conversion from Natural Gas to Propane (L.P.) on all models. The conversion
should be done before connecting the unit to the gas supply.
Units are shipped from the factory equipped for use on natural gas. Orifices necessary for LP
(propane) are provided in a bag tied to the valve on the front panel.
1. Remove the knobs and front panel.
1.
Remove the trivets from the
top of the appliance
Note: Unit Number on side
of orifice fittings.
Regulator with brass cap
CONVERSION
.
Plastic Insert
L.P Position of insert
Remove the burner from the top
2.
3. Replace the orifice
fittings into the valve.
4. Install the front
5. Before installing the regulator,
unscrew the octagonal cap, up you can
read (NAT) on the plastic insert out of
the cap, flip it over and snap back in
6. Continue with
5
of the gas pipe
.
panel knobs.
installation.